Make sure you are connected to the SMIS-WIN network before starting.

There are main steps to setting up your printer and printing:

1. Installing the printer
2. Printing with authentication
3. Retrieving your print job

You need to first connect to the print server, and then add the printer.

1. Click on the Start menu, and then Computer
2. Click in the location bar of the Computer window, and enter

   \\print.smis.ac.jp\

   Then click Enter.

3. Enter your St. Mary's username and password (the same as you use to connect to SMIS-WIN), with the username in the form

   SMIS\username

   Click OK.

4. When the window opens, find N359MFPC1 and double-click on it. It will take a few moments while the printer driver is installed.
5. If you go to Start menu and then Devices and Printers, you should see the printer listed there.

Make sure you're connected to SMIS-WIN to print.

Your document appears on the printer's display, but does not print. A small red light is flashing at the corner of the display.

Typically this means the page layout does not match any of the available paper sizes. You can choose to print US Letter to A4, or you can clear the print job and resend it from your computer (after changing the page layout to an available paper size).

Make sure to use the same username and password that you use to connect to SMIS-WIN.