Differences

This shows you the differences between two versions of the page.

--- byod:windows [2016/01/08 07:26] – [Troubleshooting] djf
+++ byod:windows [2023/12/13 02:12] (current) – [Installing the Mobility Print application] Feldmeyer, DJ
@@ Line 5: / Line 5: @@
 There are main steps to setting up your printer and printing:
-  - Installing the printer
+  - Installing the Mobility Print application
   - Printing with authentication
   - Retrieving your print job
-===== Installing the printer =====
+===== Installing the Mobility Print application =====
-You need to first connect to the print server, and then add the printer.
+Install the Mobility Print application, and use this to install your printer.
-  - Click on the Start menu, and then Computer
+  - Open an Explorer window, and enter this address in the location bar:\\ <code>\\bu1.campus.smis.ac.jp\Drivers</code>\\ {{:byod:db01_drivers.png?nolink&400|Windows Explorer location bar}}
-  - Click in the location bar of the Computer window, and enter <code>\\print.smis.ac.jp\</code> Then click Enter.
+  - Find the application "pc-mobility-print-printer-setup-XXXX.exe" and run it:\\ {{:byod:run_pc_mobility.png?nolink&400|context menu to run file from file list}}
-  - Enter your St. Mary's username and password (the same as you use to connect to SMIS-WIN), with the username in the form <code>SMIS\username</code> Click OK.
+  - Select the language, agree to the terms and give permission for the installation, etc., until you reach the printer list window.
-  - When the window opens, find N359MFPC1 and double-click on it. It will take a few moments while the printer driver is installed.
+  - Select the desired printer from the list:\\ {{:byod:printer_selection.png?nolink&400|Printer selection dialog}}
-  - If you go to Start menu and then Devices and Printers, you should see the printer listed there.
+  - When prompted, enter your St. Mary's user ID and password:\\ {{:byod:username_and_password.png?nolink&400|Username and password dialog}}
+  - Click Next and then Finish to finish the installation
 ===== Printing with authentication =====
+Make sure you have the correct page set-up, and authenticate to print.
+  - Before printing, make sure your document size is A4 or A4 small:\\ {{ :byod:15_a4.jpg?nolink |A4 document size}}
+  - In the Print dialog, select the Printer Name that you specified when you installed the printer. Then click OK to print
+  - You may be asked to enter your username and password to print. Enter your St. Mary's username and password (the same as you use to connect to SMIS-WIN):\\ {{ :byod:17_connect_to_printer.jpg?nolink |Enter username and password}}
 ===== Retrieving your print job =====
+After printing, log in at the printer to retrieve your print job.
+  - If the printer is sleeping, click the login/logout button to wake the printer.
+  - Tap on Username and enter your username (the same as above)
+  - Tap on Password and enter your password
+  - Tap on Log In
+  - If your log-in is successful, you should see your document name on the display. Tap on the document to select it, and then tap the Print button.
 ===== Troubleshooting =====